Basic Info.
Certification
CE, ISO, En15194, EEC
Brake
HUB Brake For Front Wheel
Maximum Loading Capacity
≥120kg
Wheel Hub
Lightweight Alloy Hubs
Product Description
Highest Speed: 18 km/h
Range: About 18-22Km (Depending on rider's weight, road condition and temperature)
Safe climbing angle: About 15° (60kg riders up to 18° . )
Charging time: 45 min
Size: Height 750mm Length 385mm Width 70mm
Weight: 9.8kg
Tire size: φ 360 mm
About Solarwalk M6
Solarwalk M6 is the latest high-tech means of transport adopting aerospace attitude control theory, fuzzy algorithm, and gyroscope system to achieve balance by forward and backward leaning. Users can control the vehicle to go forward, accelerate, decelerate, brake or others, by inclining forward or leaning backwards. The left and right balance is similar to the technique of riding a bicycle - achieved through slightly slanting left or right.
Solarwalk features as a green product that can be easily carried around on a bus or subway, making it a helpful tool in commuting.
Usage
I. See diagram for reference:
Power
Battery level
Charger
Treadle (Foldable)
I i. Starting Solarwalk
Place Solarwalk vertically on the ground and turn on the power. Power and Battery Level LED will illuminate and buzzer will beep, then the vehicle is ready to use.
If Solarwalk tilts either forward or backwards after power is switched on, then wait until it reverts to upright position before riding.
Iii. Battery level
A four-bar LED indicator is used to indicate battery level. All four will light up when power level is more than 85% and will go off one by one as the level decreases. Please check power level before usage to ensure there is enough power for the return trip. You may want to charge it every time after use.
When power level is lower than 10%, all four lights will flicker and the buzzer will sound off. The front part of the treadle will lower itself to force you to decelerate and eventually stop. Please do not restart when this occurs to avoid any accidents.
Sustained range will decrease during winter. This is because the battery performance decreases quickly in cold conditions. In -15º C, for example, battery performance is only about half in comparison to that in room temperature.
Iv. Speed Control
To prevent injuries caused by speed, Solarwalk comes with a speed control design. When speed exceeds l2km/h, the front part of the treadle will rise slowly; When the speed exceeds 16km/h, the treadle will rise to a 10° Angle, to prevent you from inclining forward to further accelerate. As the speed decreases, the angle of the treadle will also lower itself.
NOTE: When the speed is about to reach its limit, please do not incline forward anymore to force acceleration to prevent injuries.
V. Side-tilting protection.
When Solarwalk tilts sideways more than a 45° Angle, for example when Solarwalk falls, the control system will activate side-tilt protection. The machine will stop running immediately to prevent injuries.
The buzzer will sound off a long buzz and the LED will flicker when this is activated.
To deactivate this, turn the power off, then restart.
Vi. Charging
Plug in the power source after inserting the charger plug, or else the charger will not activate. This can also prevent potential risks, to ensure a safer charge.
Solarwalk provides a high-power charger. During normal conditions, only 45 mins is needed to be fully charged, 30 mins allows 80% charged. The red light on the charger indicates charging, green indicates charging complete.
If not in urgent need, please wait until charging complete before unplugging, because after charging, the protection circuit will perform power flow equilibrium.
Vii. Water resistance
The water resistance level of Solarwalk is IP 56, allowing it to pass through water of no deeper than 10cm. It can be used in light rain, but do not steep the vehicle in water or take long rides in heavy rain.
Address:
No. 2488, Jinqiu Road, Baoshan District, Shanghai, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Manufacturing & Processing Machinery, Packaging & Printing
Management System Certification:
ISO 9000
Company Introduction:
We Shanghai Microwolf specialize in developing, producing electrical products, manufacturing & processing Machinery.
Frequency inverter is a product we developed on year of 2003, which is used for speed control on motor-driven system. As a result of its high quality and competitive price, we have won a good reputation in the market.
On the year of 2013, we developed a very new product-desktop 3D printer which is wildly used in industrial design, mechanical mold manufacturing, footwear industry, education, health care, art design, and so on.
Fabric fusing machine is a new product we developed together with an apparel machinery manufacturer-Gaoqi.
For more information about us and our products, please feel free to contact us.